How to troubleshoot an LVC-5000 series system when the PoE board is not working?

Problem

The PoE is not supplying power, how could I troubleshoot?

Solution

After the system powering up, the PoE should supply power to the system’s connectors. If the PoE LED is not lit, please perform the following procedure:
1.  Open the top cover and check whether the power input on the PoE is properly connected to the mainboard’s 4P power connector.
2.  Open the top cover and check whether the LED1 and LED2 LEDs are lit on the PoE board. If not, replace with a new PoE board.