Solar PV Monitoring Solution with LEC-7242

Inevitably, solar power panels will fail. One way or the other, dust will start to accumulate on panels, micro-cracks will start to appear, degradation, corrosion, snails will leave their tracks, all of this (and more), will lower the energy output.

Monitoring the solar PV farms, their components, and the connections between them are critical for ensuring operational continuity and even improving productivity. The solar PV monitoring system collects data from IoT/IIoT sensors, aggregates it, and sends it off to a cloud-based server, for further analysis.


Monitoring a solar power PV plant can be challenging, especially because these are remote and unmanned places, and have limited resources.

Some solar power plant companies are innovating with new IoT and IIoT sensors, and telemetry technology. They are generating more quantities of data at the source. But this new data is also bringing new challenges like, what to do with disparate data? How to integrate it? How to use this data and move it efficiently?

We will be reviewing a solar PV monitoring solution that helps resolve most of these challenges. Lanner’s LEC-7242 is an intelligent edge IoT Wireless Gateway appliance. It brings more computation, storage, and communication prowess closer to the endpoints (where solar PV panels are). This Industrial IoT Gateway is a perfect fit for solar power PV farms monitoring because it supports multiple transmission protocols and is designed to work under harsh environmental conditions.


Below are the most common challenges when monitoring remote and unmanned solar PV farms.

Challenging O&M in remote solar PV farms

Solar power plants are often located in unmanned and remote areas which complicate the O&M (Operations and Maintenance) processes. Depending on the size of the solar PV farm, the solar power companies would need to have an agent on-site or someone traveling daily. Additionally, these remote and outdoors solar PV farms face unpredictable changes in climate and often harsh climate conditions— where traditional IT equipment is prone to fail.

Network Limitations

New IoT/IIoT sensors generate large and varied data which could be useful for efficient monitoring and management. But, having to move large amounts of data, reliably, and fast, is very challenging, especially for current off-grid and remote sites. The reason is that there is a lack of reliable and fast bandwidth in these areas. Hard-wired installations can be very expensive solutions for off-the-grid solar power plants.

Current SCADA limitations.

Solar Power plants and substations have been traditionally monitored using SCADA systems. The SCADA sensors gather data and send it to an RTU (Remote Terminal Unit) which is wired to a nearby server. RTUs gather data in real-time from sensors, inverters, or trackers and transmit it back to the MTU. Typical solar power SCADA solutions use fiber optics for upstream communication (RTU to MTU, but this can be an expensive and non-scalable solution.


The solar power PV monitoring solution can address most of the discussed challenges efficiently. It is composed of the following elements:

Data Collection: IoT Sensors and Meters

The IoT/IIoT sensors and meters gather data from the field. They can be anything from solar plant string inverters, combiner boxes, pressure sensors, temperature sensors, humidity sensors, etc. These data collectors transfer their data to the nearest IIoT gateway, via wireless (such as LTE or WiFi) or wired (such as Ethernet).

The Industrial Wireless Gateway

The Industrial IoT wireless gateway acts as the access point for all the IoT/IIoT devices to another network (such as private cloud central station, or public cloud). It may use wired (Serial or Ethernet) or wireless (LoRa or WiFi) interfaces for downstream transmission, and 4G-LTE or wired for upstream — to send the results to the central station. But, the Intelligent edge IoT Gateway can do more than just provide routing. It also aggregates the data collected by IoT/IIoT devices and performs edge analysis.

Lanner’s LEC-7242

Lanner’s LEC-7242 is an industrial environment gateway, empowered by Intel Apollo Lake CPU and FCC/CE/PTCRB certification for LTE or WiFi. The gateway is explicitly designed to work with the IIoT and IoT network environments, by aggregating their data and providing intelligent edge capabilities. The device ca run dedicated IoT software client (i.e., PV monitoring software) to explicitly keep track of certain parameters and send alerts to an on-premise monitoring center or cloud-based server.

The LEC-7242 device is also rich in I/O. It comes with wireless support for LoRa, WiFi and 4G-LTE.

Product Highlights:

Head-end Software

The industrial wireless gateway takes the aggregated data and transmits it to the data center via Ethernet or LTE connectivity.

The data center is the perfect place to collect and integrate data from all distributed solar power substations. With the help of unified monitoring and management software, all this data can be used by agents to monitor, gain insights, make decisions, or even feed this data into an intelligent AI/ML inference engine.


The most popular advantages of the Solar PV monitoring system are: reducing costs and the need for manpower, integrating with data acquisition systems like SCADA, increasing the productivity of solar PV farms, and introducing ML and predictive modeling.

Reduce Costs and Man-power

The LEC-7242, IoT gateway solution integrates data collection, analytics, and transmission into a single appliance. This level of integration reduces the need for extra resources. It helps operators remotely monitor in real-time different components of the solar power station, without having to physically visit the site.

Ways to reduce costs?

Integrate with existing SCADA

The IIoT gateway solution can also be integrated with an established data acquisition system such as SCADA. The gateway collects and cleans the data acquired by SCADA and aggregates it, into a single data center control.

Although the solution does not replace SCADA — it improves upon the existing SCADA monitoring and controlling system. It brings machine intelligence, data analysis, scalability, interoperability, and standardization. Additionally, thanks to the improvements in some IoT’s radio technology with lower power consumption and wider coverage, such as LoRa, SCADA can be improved further.

Increase the Productivity of Solar PV Farms

The IIoT edge wireless gateway gathers data from multiple sources and combines it into a summary for easier data analysis. Using aggregated data from multiple sources helps build a better picture of the entire solar power farm. Now, remote operators will know which asset is producing more, and which ones are not, and the reasons why.

Data aggregation helps to have a more productive solar farm, by:

Introduce Machine Learning (ML) and predictive modelling

What the intelligent edge IIoT Gateway (LEC-7242) does, is that it takes this data, aggregates it (via wireless and wired capabilities), and performs edge analytics.

The IoT gateway runs the edge client for the IoT software. This IoT software allows the device to perform dedicated edge analytics, monitor specific parameters, and detect anomalies. It may also generate alarms to target on-premises personnel or send to a cloud-based monitoring and management center.

With the LEC-7242’s edge analytics capabilities, it is easier to identify patterns and spot trends that otherwise wouldn’t be visible. For example, by analyzing aggregated data, an intelligent model can introduce predictive maintenance schedules. The regular maintenance of solar power plants can be replaced for high-quality and timely servicing.

Next Steps

For more information on other Intelligent Edge Appliances or the Solar PV Monitoring Solution with LEC-7242, please contact Lanner’s sales representative.


Photo by Andreas Gücklhorn on Unsplash

Exit mobile version